This 6S Lipo-compatible and 150A rated works with sensored and sensorless motors and offers selectable 6V or 7.2V high-output BEC system to feed the latest breed of high-voltage servos. Thanks to its dust and water protection the controller will withstand nearly every racing condition and is further helped by the standard electric switch that is more reliable than the standard mechanical switches. The controller comes pre-soldered with T-plug or Traxxas T -style connector tubes while offering Traxxas type compatible mounting lugs for secure fitting on many chassis.
• Compatible with sensorless motors and sensored motor
• Fully waterproof design for all weather conditions
• Super internal switch-mode BEC with switchable voltage of 6V/7.2V and a cont./peak current of 6A/25A for easily driving big torque servoss and high voltage servos.
• Highly reliable electronic switch avoids troubles which may happen to traditional mechanical switch due to dirt, water, dash and etc.
• Separate programming port to easily connect the LED program card or the LCD program box to the .
• Proportional brake with 9 level of brake amount/maximum brake force and 9 level of drag brake force.
• 5 levels of acceleration/punch from soft to aggressive for different vechicles, tires and tracks.
• Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle sinal loss protection).
• Advanced programming via portable LED program card or multifunction LCD program box.
• Firmware upgrade via HOBBYWING multifunction LCD proram box (item sold separately).
Cont./Peak Current: 150A / 950A
Motor Type: Sensored / Sensorless Brushless Motor (only in sensorless mode)
Motor Limit: Brushless Motor Limit with 4S LiPo/12 cells NiMH: KV≤3000 (4274 size motor)
Brushless Motor Limit with 6S LiPo/18 cells NiMH:KV≤2400 (4274 size motor)
LiPo / NiMH Cells: 3-6S LiPo / 9-18S NiMH
BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V
Programming Port: FAN/PRG Port
Suitable for: 1/8th Touring Car, Buggy, Truggy and Monster Truck
Kindly Fill In Form here to get a Latest Promotion at Mobile