Menu
Your Cart

Sanwa/Airtronics SD10GS 10-Channel 2.4GHz FHSS-3 Radio System w/RX-1011FS Receiver

Sanwa/Airtronics SD10GS 10-Channel 2.4GHz FHSS-3 Radio System w/RX-1011FS Receiver
  • Stock: OUT OF STOCK
  • Model: 101A30972
Day
Hour
Min
Sec
RM849.00
RM1,289.00
Ex Tax: RM849.00


Description

This is the Sanwa SD-10GS 10-Channel 2.4GHz FHSS-3 Radio System, with an included RX-1011FS 10-Channel Receiver. When you are ready to step-up to a radio that does it all, but dont want to break the bank, you owe it to yourself to check out the Sanwa SD-10GS. The Sanwa SD-10GS is a dedicated 2.4Ghz FHSS High Performance radio system designed to give every modeler, competition or sport, Glider, Aircraft, or Helicopter, an easy to use radio system that is powerful, flexible for any application, and yet affordable. The performance of this radio is simply amazing.

They're back, with a better look
The SD-10G is an awesome radio and a favorite among competition flyers including areas such as pattern/F3A and sailplanes. The SD-10GS offers even more. More V/R controls, more switches, a higher quality look, and a professional feel.

Get The Advantage

The SD-10GS was developed by Sanwa's best and brightest computer programmers in concert with top-level pilots from Sanwa Japan and Sanwa USA. From F3J World Champions to 3D Helicopter Experts, from AMA Hall-of-Famers to Pattern Nats Champs, the team who developed the SD-10GS for you are the most dedicated and experienced modelers in the world today. This competition-level radio is at home in the hands of a glider pilot and F3A aerobatic champions alike.

General System Features:

  • 10-Ch Digital Proportional Computer Radio with Advanced Programming
  • Designed for Competition Fixed Wing, Sailplane and Helicopters
  • 2.4G FHSS-3 / FHSS-1 Technology (Selectable)
  • 10-Ch Programmable Fail Safe (FHSS-3 Only / 4-Channel Fail Safe with FHSS-1 Receivers)
  • Compatible with Sanwa 2.4G FHSS-3 and FHSS-1 Aircraft Receivers
  • Direct Model Select
  • Programmable Custom Menu
  • Easy-to-Read LCD Display with LCD-Only Display Switch
  • Simple Wing and Model Templates
  • Servo Reversing, Centering, End Point Adjustments, and Limits
  • Six Digital Trim Switches
  • 3-Axis Triple Rates and Bi-Directional Exponential
  • 3-Positon Programmable Switches
  • 2 Programmable Side Levers and Programmable Dial Knob
  • Optional 'Stiff' Control Springs to Fine-Tune Control Stick Feel
  • Optional Throttle Stick Stops to Limit Control Stick Travel
  • User Naming, Model Naming and Model Select
  • FHSS-1, FHSS-3, and PPM-8 Modulation Selection
  • Low-Power Range Check Mode
  • Adjustable Receiver Battery Fail Safe Voltage
  • Trainer System
  • User-Selectable Modes
  • Programmable Channel Assignments
  • Stick Switch Functions
  • Stop Watch, Rhythm, System, and Integral Timers
  • 20-Model Memory with Data Copy, Reset, and Transfer
  • Add-On Memory Expansion Card and PC Connectivity

Common Programming Features:

  • Servo Monitor
  • Stick Monitor
  • Aileron/Elevator/Rudder Triple Rates
  • Aileron/Elevator/Rudder Bi-Directional Exponential
  • Channel Delay
  • Digital Trims
  • Trim Step Resolution
  • Trim Authority
  • Variable Resistance Lever Assign
  • 5 Flight Modes
  • Flight Mode Copy, Delay, and Naming
  • Helicopter, Airplane and Sailplane specific programming functions

Specifications:
Output Power: 100mW
Operating Voltage: 6.7-10.2v
Current Drain: 240mA
Temperature Range:
 32-122ºF (0-50ºC)
Pulse Width: 0.9-2.1msec
Weight with Battery: 32.8oz (930gr)
Frequency/Modulation Type: 2.4G/FHSS-3 and FHSS-1 Selectable
Model Memory: 20 (40 Using Memory Expansion Card)
Memory Expansion Card: Proprietary, 20 Models (Available Separately)   

Includes:

  • SD-10GS 10-Ch 2.4G FHSS-3 Transmitter
  • 1011FS 10-Ch 2.4G FHSS-3 Receiver
  • On/Off Switch
  • Servo Extension
  • User's Guide

Needed To Complete:

  • Nothing...!

    *NOTE: When using the SD-10G with an FHSS-3 receiver, it simply may be too fast for some analog servos. They simply may not work. To truly see the advantages of this high-resolution, high frame-rate, low-latency radio, you'll need digital servos. If you are using analog servos and experience problems with the 10-ch receiver, and you don't have digital servos to replace them yet, that's OK, just use one of the Sanwa 2.4G FHSS-1 full-range receivers available. These receivers ALL work GREAT with the SD-10G and are 100% compatible with analog servos.