Traxxas XRT Ultimate Limited Edition VXL 8S Brushless 1/6th Scale Electric Monster Truck (Blue) w/TQi 2.4GHz Radio System
Description
MODEL 78097-4: XRT® Ultimate: 1/6 scale 4X4 brushless race truck, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system, VXL-8s™ brushless power system, and ProGraphix® clipless body.
Specifications:
- Length (including wing): 31.41 inches (798 mm)
- Front Track: 23.43 inches (595 mm)
- Rear Track: 23.43 inches (595 mm)
- Ground Clearance: 1.93 inches (49 mm)
- Weight: 21.55 pounds (9.79 kg) - with body 24.39 pounds (11.09 kg) - with body & two 4s 6700 mAh LiPos
- Height: 10.15 inches (258 mm) - ride height 12.12 inches (308 mm) - full droop
- Wheelbase: 18.9 inches (480 mm)
- Shock Length (front): 6.79 inches (173 mm)
- Shock Length (rear): 6.79 inches (173 mm)
- Tires (Pre-Glued): Gravix™ Belted 7.4″ x 4.0″ (188 mm x 102 mm)
- Wheels: 4.3″ x 5.7″ (110 mm x 147 mm)
- Speed Control: Velineon® VXL-8s™
- Motor (electric): Velineon 1200XL Brushless with heat sink and dual fan shrouds
- Overall Drive Ratio: 20.6:1 (20/50 motor pinion and spur gear)
- Differential Type: Sealed, hardened steel bevel, limited slip
- Gear Pitch (Spur and Pinion): Module 1.0
- Chassis Structure/Material: Composite nylon tub
- Brake Type: Electronic
- Drive System: Shaft-driven 4WD
- Steering: Aluminum bellcrank
- Radio System: TQi™ 2.4 GHz 2-channel transmitter with factory-installed wireless module
- Servo: Torque: 450 oz-in speed: 0.17 sec/ 60 degrees (6.0 volts)
- Top Speed: 60+ mph with two 4s LiPo batteries and optional overdrive gearing (sold separately)
- Skill Level:5
- Battery Tray:186 mm x 51 mm x 44 mm
High-Performance Aluminum Upgrades
- 6061-T6 aluminum C-hubs
- 6061-T6 aluminum steering blocks
- 6061-T6 aluminum rear hub carriers
- 6061-T6 aluminum differential housings
- 6061-T6 aluminum motor mounts
- 6061-T6 aluminum wheelie bar wheels
- Aluminum motor washers
VXL-8s™ Waterproof Electronic Speed Control
- Aggressive tuning for more power at any RPM
- Built-in cooling fan
- Machined heat sinks
- 10-gauge silicone wire
- Integrated protection circuits
- LED status lights
Velineon® 1200XL Brushless Motor
- “Big Block” brushless motor
- 4-pole 1275 kV
- 5 mm output shaft
- Oversize aluminum heatsink for improved cooling
- Dual cooling fans
- Traxxas Stability Management® (TSM)
- Improves straight line acceleration and braking on low traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
TQi™ 2.4 GHz 2-Channel Radio System with Factory-Installed Wireless Module
- Factory-installed telemetry sensors
- 5-channel micro receiver (6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
X-Maxx-Spec® 8s Drivetrain
- Full-time shaft-driven 4-wheel drive
- Machined, hardened steel pinion and spur gear
- Heavy-duty steel CV driveshafts & axles
- Splined aluminum center driveshaft
- Fully machined aluminum stub axles
Transmission
- Mod-1 steel pinion and spur gears
- Torque-Biasing Center Drive
Maxx-Spec 8s Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Splined outdrives attached with external thru-bolt method
- Reinforced bulkhead and covers increase bearing support
Rock-Solid Motor Mounting System
- Rigid aluminum motor mounts
- Precise preset gear mesh adjustments
- 4 keyed pins lock the motor in place
- Motor retention separate from gear mesh
GTX Aluminum Race Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- Ultra-smooth TiN-coated 5.2 mm damper shafts
- Lower seal cartridge includes integrated wiper seal combination
- Aluminum upper spring retainers
- Aluminum shock caps with pivot balls
- Lower spring perches bolted on
WideMaxx® Suspension
- Extra-wide suspension arms
- Made from heavy-duty cold-weather composite
- Double-shear connections
- High-strength steel suspension pins with aluminum retainers
- 4 mm machined pivot balls
- TUBES 7075-T6 Aluminum front toe links
- Oversized wheel bearings
Low-CG Chassis Design
- Modular chassis with interlocking bulkheads
- Low center of gravity for improved handling
- Flat bottom design
- Heavy-duty interlocking skid plates
- High strength buttressing on shock towers
- Dual snap-lock battery compartments
- Protects batteries from side impacts
- Allows secondary battery clip security
- Interlocking components for tight tolerances
ProGraphix® Clipless Body
- Snaps in place in just seconds
- Secure body latches are easy to use
- Rigid internal frame
- Dual cold-air intakes
- Molded body reinforcements for tear-through protection
- Protective top skids
- Rugged high-downforce rear wing
Heavy-Duty Bumpers
- Reinforced front bumper and rear wing support
- Absorbs impact forces while retaining shape
- Nerf bars for side impact resistance
- Heavy-duty wheelie bar with carry handle
Wheels and Tires
- 7.4″ Gravix™ belted race tires
- Belted carcass virtually eliminates ballooning at high speed
- Low sidewall for sharp turn-in response
- Runs quieter than traditional off-road tires
- 4.0″ matte black XRT race wheels
- High-strength glue and bead design
- Huge 24 mm splined wheel hubs
Steering
- 6061-T6 aluminum steering bellcranks
- Powerful 450 oz-in metal-gear steering servo
- Double-shear aluminum servo horn
- Heavy-duty servo saver spring
- Dirt evacuation channels
- XRT Ultimate, Ready-To-Race model with Traxxas Big Block™ brushless motor
- VXL-8s waterproof electronic speed control with integrated telemetry
- Quick Start Guide
- TQi 2.4 GHz radio system with factory-installed wireless module
- High quality maintenance tools
- Batteries
IMPORTANT: XRT Ultimate requires the use of LiPo batteries equipped with Traxxas High Current Connectors. Traxxas 4-Cell, 6700 mAh or greater, Power Cell LiPo batteries with iD are recommended (part 2890X).
- LiPo Balance Charger with iD®
- AA Alkaline Batteries