Traxxas X-Maxx Ultimate Limited Edition VXL 8S Brushless Electric Monster Truck (Green) w/TQi 2.4GHz Radio System

MODEL 77097-4: X-Maxx Ultimate: fully assembled, Ready-To-Race, with TQi 2.4 GHz radio system, VXL-8s brushless power system, and ProGraphix clipless body.

Specifications:

• Length: 30.67 inches (779 mm)
• Front Track: 21.3 inches (540 mm)
• Rear Track: 21.3 inches (540 mm)
• Ground Clearance: 4.2 inches (107 mm)
• Weight: 22.20 pounds (9.5 kg) 25.06 pounds (11.39 kg) with two 4s 6700 mAh LiPo batteries
• Height (ride): 3.99 inches (355 mm)
• Wheelbase: 18.92 inches (480 mm)
• Shock Length: 7.4 inches (187 mm)
• Tires (pre-glued): Belted Sledgehammer® 8.4″ x 4.0″ (203 mm)
• Wheels: 4.3″ x 5.7″ (110x145 mm)
• Wheel Hex Size: 24 mm splined hex
• Speed Control: Velineon® VXL-8s™
• Motor (electric): Velineon 1200XL
• Transmission: Single-speed
• Overall Drive Ratio: 8.11 (stock, out-of-box)
• Differential Type: Sealed, hardened steel bevel, limited slip
• Gear Pitch: Module 1.0
• Chassis Structure/Material: Composite nylon tub
• Brake Type: Electronic
• Drive System: Shaft-driven 4WD
• Steering: Aluminum bellcrank
• Radio System: TQi™ 2.4 GHz transmitter with factory-installed wireless module
• Servo: Torque: 450 oz-in speed: 0.17 sec/ 60 degrees (6.0 volts)
• Top Speed: 50+ mph with two 4s LiPo batteries and optional gearing (sold separately)
• Skill Level :6
• Battery Tray: 197 mm x 52 mm x 44 mm

High Performance Aluminum Upgrades

• 6061-T6 aluminum C-hubs
• 6061-T6 aluminum steering blocks
• 6061-T6 aluminum rear hub carriers
• 6061-T6 aluminum differential housings
• 6061-T6 aluminum motor mounts
• 6061-T6 aluminum wheelie bar wheels
• Aluminum motor washers

VXL-8s waterproof electronic speed control

• 8s LiPo compatible
• Built-in cooling fan
• Real-time telemetry via Traxxas Link™
• Machined heat sinks
• 10-gauge silicone wire
• Integrated protection circuits
• LED status lights

Velineon 1200XL Brushless Motor

• 4-pole 1275 kV
• 5 mm output shaft
• Aluminum slip-on heat sink
• Dual motor cooling fans

Traxxas Stability Management (TSM)

• Helps prevents spinouts and loss of control
• Adjusts from off to 100% assistance from the transmitter
• TQi 2.4 GHz 2-Channel Radio System with Wireless Module
• Factory-installed telemetry sensors
• 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
• Automatically stores and loads settings for up to 30 Traxxas Link-enabled models

Clipless Body Mount System

• One-hand installation and removal
• Uses pivoting rear latch mechanism
• Eliminates body posts and clips
• Reinforced for extra protection

Drivetrain

• Full-time shaft-driven 4-wheel drive
• Machined, hardened steel pinion and spur gear
• All-metal gears and CV driveshafts
• Torque-Biasing Center Drive™ absorbs shocks and distributes power
• 24 mm splined wheel hexes
• Wheel hexes retained with a clip
• 17 mm hex on outside of wheel
• Sealed, silicone fluid-filled diffs with large module ring and pinion gears
• Splined outdrives attached with external thru-bolt method
• Fully machined aluminum stub axles
• Splined aluminum center driveshaft

Fixed Motor Mounting System

• Rigid aluminum motor mounts
• Preset gear mesh adjustments
• No manual adjustments required
• Motor retention separate from gear mesh

Modular Composite Chassis

• Modular chassis interlocks with front and rear bulkheads
• Motor mounts to rear bulkhead to eliminate gear crunching flex
• Easy to service and access components
• Driveline is sealed in the chassis to keep out dirt and grit

Snap-Lock Battery Retention System

• No body clips or hook and loop straps
• Battery hold-downs pivot for easy access
• Adjustable for battery size
• More secure than conventional retention systems
• Integrated into chassis top brace for improved battery tray and chassis stiffness

Steering

• 6061-T6 aluminum steering bellcranks
• 2085X high-output metal gear steering servo
• Double-shear aluminum servo horn
• Heavy-duty servo saver spring

Suspension

• TUBES 7075-T6 Aluminum front toe links
• All critical suspension points have double shear strength
• High strength steel suspension pins with aluminum retainers
• Suspension pins retainers won’t come loose or “back-out”
• 4 mm machined pivot balls
• C-hub and steering block geometry maximizes steering angle
• Adjustable roll center
• Steel upper and lower tie bars
• Full contact sealed bearings used in exposed locations

Aluminum GTX™ Shocks

• Machined aluminum threaded body
• Extra-large bore and capacity
• Ultra-smooth TiN-coated 5.2 mm damper shafts
• Lower seal cartridge includes integrated wiper seal combination
• Adjustable aluminum upper spring retainer
• Aluminum shock caps with pivot balls
• Fixed shock locations
• Lower spring perches bolted on

Bumpers

• Front energy absorbing rubber impact bumper
• Lower front and rear skids for impact and abrasion resistance
• Integrated nerf bars for side impact resistance

Wheels/Tires

• Massive 8.4″ Sledgehammer® belted tires
• Virtually eliminates ballooning at high speeds
• Open tread block design
• 2-piece foam insert
• High-strength glue and bead design
• Large, dual-diameter wheels

• X-Maxx Ultimate, Ready-To-Race model with Traxxas Big Block™ brushless motor
• VXL-8s waterproof electronic speed control with integrated telemetry
• Quick Start Guide
• TQi 2.4 GHz radio system with factory-installed wireless module
• High quality maintenance tools

• Batteries

IMPORTANT: X-Maxx Ultimate requires the use of LiPo batteries equipped with Traxxas High Current Connectors. Traxxas 4-Cell, 6700 mAh or greater, Power Cell LiPo batteries with iD are recommended (part 2890X).

• LiPo Balance Charger with iD®

• AA Alkaline Batteries