Traxxas XRT Ultimate Limited Edition VXL 8S Brushless 1/6th Scale Electric Monster Truck (Green) w/TQi 2.4GHz Radio System

MODEL 78097-4: XRT® Ultimate: 1/6 scale 4X4 brushless race truck, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system, VXL-8s™ brushless power system, and ProGraphix® clipless body.

Specifications:

• Length (including wing): 31.41 inches (798 mm)
• Front Track: 23.43 inches (595 mm)
• Rear Track: 23.43 inches (595 mm)
• Ground Clearance: 1.93 inches (49 mm)
• Weight: 21.55 pounds (9.79 kg) - with body 24.39 pounds (11.09 kg) - with body & two 4s 6700 mAh LiPos
• Height: 10.15 inches (258 mm) - ride height 12.12 inches (308 mm) - full droop
• Wheelbase: 18.9 inches (480 mm)
• Shock Length (front): 6.79 inches (173 mm)
• Shock Length (rear): 6.79 inches (173 mm)
• Tires (Pre-Glued): Gravix™ Belted 7.4″ x 4.0″ (188 mm x 102 mm)
• Wheels: 4.3″ x 5.7″ (110 mm x 147 mm)
• Speed Control: Velineon® VXL-8s™
• Motor (electric): Velineon 1200XL Brushless with heat sink and dual fan shrouds
• Overall Drive Ratio: 20.6:1 (20/50 motor pinion and spur gear)
• Differential Type: Sealed, hardened steel bevel, limited slip
• Gear Pitch (Spur and Pinion): Module 1.0
• Chassis Structure/Material: Composite nylon tub
• Brake Type: Electronic
• Drive System: Shaft-driven 4WD
• Steering: Aluminum bellcrank
• Radio System: TQi™ 2.4 GHz 2-channel transmitter with factory-installed wireless module
• Servo: Torque: 450 oz-in speed: 0.17 sec/ 60 degrees (6.0 volts)
• Top Speed: 60+ mph with two 4s LiPo batteries and optional overdrive gearing (sold separately)
• Skill Level:5
• Battery Tray:186 mm x 51 mm x 44 mm

High-Performance Aluminum Upgrades

• 6061-T6 aluminum C-hubs
• 6061-T6 aluminum steering blocks
• 6061-T6 aluminum rear hub carriers
• 6061-T6 aluminum differential housings
• 6061-T6 aluminum motor mounts
• 6061-T6 aluminum wheelie bar wheels
• Aluminum motor washers

VXL-8s™ Waterproof Electronic Speed Control

• Aggressive tuning for more power at any RPM
• Built-in cooling fan
• Machined heat sinks
• 10-gauge silicone wire
• Integrated protection circuits
• LED status lights

Velineon® 1200XL Brushless Motor

• “Big Block” brushless motor
• 4-pole 1275 kV
• 5 mm output shaft
• Oversize aluminum heatsink for improved cooling
• Dual cooling fans
• Traxxas Stability Management® (TSM)
• Improves straight line acceleration and braking on low traction surfaces
• Never dulls throttle or slows the truck
• Adjusts from off to 100% assistance from the transmitter

TQi™ 2.4 GHz 2-Channel Radio System with Factory-Installed Wireless Module

• Factory-installed telemetry sensors
• 5-channel micro receiver (6533) with fail-safe security
• Patented waterproof receiver box with easy-access plug

X-Maxx-Spec® 8s Drivetrain

• Full-time shaft-driven 4-wheel drive
• Machined, hardened steel pinion and spur gear
• Heavy-duty steel CV driveshafts & axles
• Splined aluminum center driveshaft
• Fully machined aluminum stub axles

Transmission

• Mod-1 steel pinion and spur gears
• Torque-Biasing Center Drive

Maxx-Spec 8s Differentials

• Heavy-duty sealed 4-gear design
• Large scale steel ring and pinion gears
• Splined outdrives attached with external thru-bolt method
• Reinforced bulkhead and covers increase bearing support

Rock-Solid Motor Mounting System

• Rigid aluminum motor mounts
• Precise preset gear mesh adjustments
• 4 keyed pins lock the motor in place
• Motor retention separate from gear mesh

GTX Aluminum Race Shocks

• Machined aluminum threaded body
• Extra-large bore and capacity
• Ultra-smooth TiN-coated 5.2 mm damper shafts
• Lower seal cartridge includes integrated wiper seal combination
• Aluminum upper spring retainers
• Aluminum shock caps with pivot balls
• Lower spring perches bolted on

WideMaxx® Suspension

• Extra-wide suspension arms
• Made from heavy-duty cold-weather composite
• Double-shear connections
• High-strength steel suspension pins with aluminum retainers
• 4 mm machined pivot balls
• TUBES 7075-T6 Aluminum front toe links
• Oversized wheel bearings

Low-CG Chassis Design

• Modular chassis with interlocking bulkheads
• Low center of gravity for improved handling
• Flat bottom design
• Heavy-duty interlocking skid plates
• High strength buttressing on shock towers
• Dual snap-lock battery compartments
• Protects batteries from side impacts
• Allows secondary battery clip security
• Interlocking components for tight tolerances

ProGraphix® Clipless Body

• Snaps in place in just seconds
• Secure body latches are easy to use
• Rigid internal frame
• Dual cold-air intakes
• Molded body reinforcements for tear-through protection
• Protective top skids
• Rugged high-downforce rear wing

Heavy-Duty Bumpers

• Reinforced front bumper and rear wing support
• Absorbs impact forces while retaining shape
• Nerf bars for side impact resistance
• Heavy-duty wheelie bar with carry handle

Wheels and Tires

• 7.4″ Gravix™ belted race tires
• Belted carcass virtually eliminates ballooning at high speed
• Low sidewall for sharp turn-in response
• Runs quieter than traditional off-road tires
• 4.0″ matte black XRT race wheels
• High-strength glue and bead design
• Huge 24 mm splined wheel hubs

Steering

• 6061-T6 aluminum steering bellcranks
• Powerful 450 oz-in metal-gear steering servo
• Double-shear aluminum servo horn
• Heavy-duty servo saver spring
• Dirt evacuation channels

• XRT Ultimate, Ready-To-Race model with Traxxas Big Block™ brushless motor
• VXL-8s waterproof electronic speed control with integrated telemetry
• Quick Start Guide
• TQi 2.4 GHz radio system with factory-installed wireless module
• High quality maintenance tools

• Batteries

IMPORTANT: XRT Ultimate requires the use of LiPo batteries equipped with Traxxas High Current Connectors. Traxxas 4-Cell, 6700 mAh or greater, Power Cell LiPo batteries with iD are recommended (part 2890X).

• LiPo Balance Charger with iD®

• AA Alkaline Batteries