SkyRC Toro TS160 160A Aluminum Sensored Brushless ESC (Black)

160A, Full Aluminum Case, Wifi Programmable using your Smartphone

This is the SkyRC TS160, a 120A Sensored Brushless ESC intended for 1/10 scale use. The TS120 features a full aluminum case, cooling fan, build-in power switch, 6V/3A BEC and 2S or 3S LiPo compatibility. For 1/8,1/10 on-road & off-road use, the ESC features a 3.5T motor limit; for 1/10 off-road use, the ESC features a 8.5T motor limit.

Precise Programming
The TS160 can be programmed using three different solutions: the LCD 6-in-1 Program Box, SkyLink PC Connection or with the WiFi Module for use with your iOS or Android device. The LCD Program Box is small enough to fit in your pit bag and also doubles as your PC Connection if ever needed, as well as being an Input PPM Signal Monitor, Servo Tester, Motor kV/RPM Tester and LiPo Battery Monitor.

WiFi Module Programming
The WiFi Module is the most convenient of the three programming solutions and offers a full user interface right on your iOS or Android device using the SkyRC ESC Link App. The TS160 features a dedicated programming socket for the WiFi Module, for quick adjustments, or you can also leave the WiFi module mounted in your RC vehicle for any-time adjustments at the touch of a button. Forget about the days of using your sensor cables to program.

Programming devices are not included and are sold separately.

• WiFi Module (SK-600075)
  
• 6-in-1 Program Box (SK-600046)

Features: 

• Low Voltage Protection
• Motor & ESC Overheat Protection
• Signal Loss Protection
• 2-3S Compatibility
  
• Full Aluminum Case
• Sensored or Sensorless Use
• Down to 3.5T Up 8.5T Motor Limit
• 6V/3A BEC
• WiFi Smartphone Programming
  

Specifications:

• Weight: 45g (without wire)
• Dimensions (LxWxH): 37.8x35.6x22.5mm (without fan attached)
  
• Constant Current: 160A
• Burst Current: 600A
• Motor Compatible: Brushless Sensor & Sensorless ESC
• Car Compatible:
• 1/10 and 1/12 On-Road & Off-Road
  
• 1/10 and 1/8 Crawlers
• Motor Limits:
• 1/10 On-Road:
• 2S LiPo (6-cell NiMH): 3.5T
  
• 3S LiPo (9-cell NiMH): 5.5T
  
• 1/10 Off-Road:
  
• 2S LiPo (6-cell NiMH): 5.5T
• 3S LiPo (9-cell NiMH): 8.5T
• Resistance: 0.00018ohm
• Battery Cell Count: 2-3S LiPo or 4 to 9-cell NiMH
  
• BEC Output: 6V/7.4V@5A
• Fan: 8V@0.2A , MAX 12.6V
• Programming: with Wifi Module (SK-600075) or Program Box (SK-600046)