IGT8 2019 HIGH PERFORMANCE NITRO CAR

FEATURES

What's new

The IGT8 2019 version is the ultimate GT platform combining great quality, performance and an outstanding look while still being the most affordable.

Pictures show car with electronics, engine and optionals not included.

New Features

The IGT8 team is continuously working to make this GT platform the best performing GT in the market.

NEW .8 PITCH LIGHTER TRANSMISSION

Available as an optional in our previous car, the IGT8 Red, the .8 transmission has proven to be a great success, improving not only acceleration but being a bullet proof transmission with very little maintenance which seems to be a common problem for most GT cars. This upgraded transmission also remains more consistent during the long runs and is 50 grams lighter than the previous one.

V2 CLUTCH BELL

The new V2 clutch material and design is specifically made to work with our aluminum shoes providing a more suitable clutch engagement while still being able to be adjusted with the 3 tension spring positions.

NEW HARDER SUSPENSION ARMS

After improving the harder plastic suspension arms in the IGT8 Red we have now taken it a step further. A solid arm now has less flex to increase response of the car.

NEW SHOCK TOWERS AND EXTENSIONS FRONT AND REAR

We have changed the front and rear suspension geometry to have less roll and more traction.

With the feedback from our team drivers around the world and factory driver Paolo Morganti we have optimized the suspension geometry of the car to provide more traction while keeping the great corner speed that characterizes our car. This change has also improved tire wear and reduced tire temperatures.



::

Technical Information

Length576mmWidth317mmHeight170mmWeight3510g (Weight may differ depending on electronics and engine brands)Wheelbase326mm~328mmInternal Gear13T bevel gear and 43T differential gear

TRANSMISSION GEARS

1st Gear

18T pinion with 62T spur included

Pinion options: 17T, 19T and 20T

Spur options: 60T and 61T

2nd Gear 23T pinion with 58T spur included

Pinion options: 24T and 25T

Spur options: 56T and 57T

OILS INCLUDED

800 CST Shock oil

100,000 CST Diff Oil

50,000 CST Diff Oil

REQUIRES

Radio and receiver

Receiver battery pack

Receiver switch

Engine and pipe system

Tires

Body and wing

Please refer to USB provided manual for assembly, a most recent version could be found in IGT8 Service & Supportsection if available.

EVEN MORE

Optional Parts

The IGT8 2017 comes with all the necessary parts to be a competitive race car: However, we also have a great selection of option parts to satisfy even the most demanding racer.

Most of the optional parts are intended to reduce weight in the car. The IGT8 2017 is very close to minimum weight so please make sure to check car weight after adding any optional parts to make sure you comply with your local track rules.



Rear Body Support

 

Part# IGT800F05

This optional rear body support prevents the rear portion of the body from bending down and helps prevent body tucks.



Titanium Screw Set

 

Part# IGT800T02

Made of high grade titanium, this set of 100 screws replace the original steel screws in the kit.



Titanium Rear Brace Screw

 

Part# IGT800T03

Made of high grade titanium it also comes with an aluminum nut.



Titanium Front Arms Screws 4pcs.

 

Part# IGT800T04

Made of high grade titanium this screws replaces the original steel ones that secures the C Hub to the Front arms.



Titanium Turnbuckle Set 5pcs.

 

Part# IGT800T05

Made of high grade titanium this replaces original turnbuckles and steering rod part# IGT8HF089



Aluminum Brake Cam 2pcs.

 

Part# IGT800T06

Made of hard coated aluminum, this part replaces original brake cam made of steel part# IGT8HF018



Aluminum A Bushings 4 pcs.

 

Part# IGT800T07

Made of hard coated aluminum, this part replaces original steel part IGT8HF042



Aluminum Joint Cups 2pcs

 

Part# IGT800T09

Made of hard coated aluminum, this part replaces original steel joint cup for center front and rear CVDs.



Aluminum Ball Set

 

Part# IGT800T10

Made of hard coated aluminum, this part replaces steel metal balls.



Titanium King Pins 4pcs

 

Part# IGT800T11

Made of high grade titanium this replaces original steel king pins part# IGT8HF040



Lightweight Differential Cup Joint 2pcs

Part# IGT800H01

Made of steel has openings to reduce weight compared to original diff cup joint part# IGT8HF005



Aluminum Steering Ball Joints 4pcs

 

Part# IGT800T08

Made of hard coated aluminum, this part replaces steel metal balls part# IGT8HF031



Serrated Wheel Nuts

 

Part# IGT800H02

Made of hard coated aluminum this serrated wheel nuts replace original part# IGT800H24



Rear 2.5mm Silver Swaybar

 

Part# IGT800H03

Silver 2.5mm rear Sway bar.



Front 2.5mm Silver Swaybar

 

Part# IGT800H28

Silver 2.5mm front swaybar.



Front 2.8mm Swaybar

 

Part# IGT8HF078

2.8mm front swaybar.



Aluminum Differential Cross Pins 4pcs

Part# IGT800H04

Made of hard coated aluminum this pins replace steel original pins part# IGT8HF027



105mm Rear Universal Set

 

Part# IGT800H05

Made of steel, this part replaces rear dog bone and axle parts # IGT8HD003 and IGT8HD001



Carbon Fiber Radio Tray Stiffener

 

Part# IGT800F01

Made of 3mm Carbon Fiber this stiffner reduces flex during breaking providing a more accurate input.



Carbon Fiber Ackerman A

 

Part# IGT800F2A

Made of Carbon fiber and mounted in bearings for smoother response, this optional is the shortest ackerman option.



Carbon Fiber Ackerman B

 

Part# IGT800F2B

Made of Carbon fiber and mounted in bearings for smoother response, this optional is the middle ackerman option which replaces part# IGT800H18



Carbon Fiber Ackerman C

 

Part# IGT800F2C

Made of Carbon fiber and mounted in bearings for smoother response, this optional is the longest ackerman option.



2.3mm Suspension Springs 2pcs

 

Part# IGT800F03

This are optional softer suspension springs, 2 pieces fits front or rear.



Flex Top Plate

 

Part# IGT800F04

This is the optional top plate for the front, provides more flex than standard IGT8HA003



Rear Hub Shaft

 

Part# IGT800H06

This optional replaces part# IGT8HF019



Aluminum CVD Axle

 

Part# IGT800T01

Lighter front or rear axle made of hard coated aluminum; this part replaces part# IGT8HD004



Aluminum Short Lock Nuts 3mm (Red 5pcs)

Part# IGT800T13

Anodized red aluminum 3mm nuts.



Chassis Brace Front & Rear

 

Part# IGT800H07

Made of anodized red aluminum, this part replaces part# IGT8HA011



IGT8 Chassis (Flex)

 

Part# IGT8X3CHF

CNC machined chassis made from 7075-T6 premium aluminum. This chassis provides additional flex.



Aluminum Rear Up-Right w/Bearings

Part# IGT800H19

Optional anodized red aluminum rear up-right with bearings.



Carbon Fiber Transmission Top Mount

Part# IGT800F13

Replaces plastic top mount to provide less flex in the center of the chassis.



Lower FF Suspension Block

 

Part# IGT800F12

Used with the stock inserts, the new FF suspension block allows the racer to have greater adjustments for either anti-squad or anti-dive.



Carbon Fiber Servo Arm for

KO-SANWA-SPEKTRUM (23T)

Part# IGT800F27

2 pcs for Throttle/Brakes and Steering. Made of 3mm Carbon fiber fits IGT8 GT and Buggy .



Center Optional Graphite Brace

 

Part# IGT800F16

Center Optional Graphite Brace. It needs IGT800F13 (Carbon Fiber Transmission Top Mount).



Center CVD Cover

 

Part# IGT800F17

Optional rubber boot for center CVD, fits front and rear



Plastic Bumper

 

Part# IGT800F18

Optional plastic bumper.



Carbon Fiber Front Body Post Support

Part# IGT800F21

Optional carbon fiber front body post support.



CNC 0 Degree Front C Hub

 

Part# IGT800H27

CNC 0 degree caster hub (Red).



IGT8 T-Shirts

 

Part# IGT8SHIRT

IGT8 T-Shirts

Sizes: M-L-XL-XXL-XXXL



IGT8 Cap

 

Part# IGT8CAP

IGT8 Cap

The head size can be regulated.