Radiolink RC6GS V2 2.4G 6CH Transmitter w/ R7FG Gyro Receiver for RC Car & Boat

This is Radiolink 2.4G 6CH integrated gyro RC6G transmitter with R6EH-G receiver. Installed is the integrated Gyro/Stability management system, which when active stabilises the car during drifting or high speed off road running. Gyro function can be enabled or disabled.

Specifications:

• Weight: 320g (11.3oz)
• Channel: 6CH
• Antenna Lenght: 106mm(4.17")
• Control Range: 600mm 
• Operating Current: 80-120mA
• Operating Voltage: 4.8-15V (6pcs of AA battery or 2s to 3s Li-po battery sold separately)
• RF Power : <20dbm
• Frequency: 2.4Ghz ISM Band (2400.0MHz-2483.5MHz)
• Modulation Mode: GFSK
• Channel resolution: 4096 , The Reguler Jitter is 0.5us
• Spread Specktrum: FHSS 67 Channel Pseudo Random Frequency Sequence Hopping
• LCD Screen: 128*64 Resolution , LCD Back Light
• Low Voltage Alarm: Yes ( Can be customized on 2s-3s battery)
• Adaptable Models: Boats , Robots , Rc Crawler , Tanks , Truck
• Compatible Receiver: R6FG , R6F , R8EF , R8F , R7FG , R4FGM , R4F
• Battery Trey Dimension: 89x59x18mm
• Model Memory: 10

R7FG Specifications:

• Operating Voltage: 4.8-10v
• Operating Current: 30mA
• Antenna Length:172mm
• Channel: 7CH
• Weight: 6g
• Size: 35x20x13mm   
  
  
  

  Includes:
  

  • (1) RC6GS V2 Transmtter
  • (1) R7FG Receiver
  • (1) Product Manual
  
  
  
  
•  Telemetry of Model Battery Voltage
• Note: The model battery voltage telemetry function has to use receiver R7FG or R8F.
• Telemetry is capable of RSSI, receiver, and model battery voltage.
• RSSI and receiver voltage data will display once binding complete.
• The model voltage will display by connecting the wire to the ESC, battery, and Telemetry port of receiver R7FG/R8F, no extra module needed.
• Telemetry of maximum 6S battery supported.
  
  
• Receiver with Gyro Integrated
• Standard receiver R7FG packed is the receiver with built-in gyro and supports high voltage servo.
• It is anti-slip and keeps the uni-direction.
• With the integrated gyro in R6FG installed, the vehicle turns more smoothly, and drifting from high speed can be prevented 
• Telemetry capable of RSSI, receiver and vehicle battery voltage.
  
  
• Telemetry capable of RSSI, receiver and vehicle battery voltage.
• RSSI and receiver voltage will display once binding complete.
• Vehicle voltage will display by connecting the wire to the ESC, battery and BAT port of receiver R7FG/R8F, no extra module needed.
• Telemetry of maximum 6S battery supported.
• Firmware V6.0.0* needs to be updated to enjoy the telemetry function.